|
Current Version 4.0f02, Build 31
- Phase Torch inactive on launch: The Phase Torch will show no signal on launch of Foo. This is caused by the initial input signal not exceeding an initialization threshold. Resizing the instrument window causes the intialization to be reset, and the Phase Torch will display an accurate value.
Issue Number: 16
- Analyzer not receiving all data: INTEL/10.4.8 ONLY Analyzer settings 4096/8192/16k do not display accurate analysis data. Frequencies displayed are half of actual value at affected resolution depths, and tool displays may not be reliable. Other resolution depths do not exhibit this behavior.
Issue Number: 281
- Output Matrix channel names not retained: User created channel names in Output Matrix of Analyzer Control and Routing Window are not recalled on subsequent launches of the application.
Issue Number: 31
|
